User Manual

12
Getting Started
Making Connections
There are several different connection options available with the BP90. Before connecting the
BP90, make sure that the power to your amplifier and the BP90 is turned off. There is no power
switch on the BP90. To turn the BP90 on or off, connect or disconnect the included PS200R
power supply from the PowerInput jack.
Mono Operation - Amplier
Connect your bass to the Input of the BP90. Connect a single mono instrument cable from the
Left (Mono) output of the BP90 to the instrument input or effect return on your amplifier. Set
the Amp/Mixer switch to Amp.
Bass Amp Input/
Effect Return
Left (Mono)
Output
Input
Amp/Mixer
switch set to
Amp.
NOTE: When using a
bass amp, it may be best to
connect the Output of the
BP90 to the effect return of
the amplifier.