User Manual

• Never disassemble the Bluetooth Speaker in an attempt to make any repairs as this could result
in electrical shock, burns or product failure.
• Use extra caution when using the Bluetooth Speaker around children.
• Product is not waterproof.
• Damage, shock, and/or injury can occure if these warnings are not heeded properly.
1 x Active Bluetooth Speaker
1 x USB Charging Cable
1 x 3.5mm AUX Cable
1 x User Manual
1. Long press the Power Button on the speaker to power up and enter pairing mode. The LED
indicator will blink while in pairing mode. You will hear a voice prompt that the speaker is ready
for pairing.
2. On your Bluetooth enabled smartphone, tablet or media player, navigate to the Bluetooth setting
menu, turn on the Bluetooth feature, and search for new devices.
3. Search for “XC5228” on the pairing device.
4. Tap this model to select it and successfully pair it with the speaker. A sound prompt should
confirm that the pairing was successful. The speaker will beep. You are now paired, connected
and ready to play music.
1. For other compatible music player devices, or MP3/MP4 players, please use the auxiliary audio
line cable (included) to connect from your external device’s “LINE OUT” jack to the “AUX-IN’ jack
of this speaker.
2. Press the “MODE” button to switch to the AUX-IN.
3. While using an external device, al functions will be controlled by the external device except for
the PLAY/PAUSE button.
1. Connect the small end of the Micro USB charging cable (included) to the Micro USB port located
on the back of speaker. Connect the larger end of the cable to your computer’s USB port or an
AC adaptor (not included).
2. The LED indicator will pulsate while charging, and stop pulsating when speaker is fully charged.
SAFETY INSTRUCTIONS
BOX CONTENTS
PAIRING
AUXILIARY LINE-IN (AUX-IN):
CHARGING