User Manual

INTRODUCTION

Thanks for choosing the DOD

Rubberneck Analog Delay pedal. The Rubberneck is an extensively featured

delay pedal which uses BBDs for up to 1.5 seconds of classic analog delay.

Rubberneck operates like a standard delay pedal but also includes some performance features not found

in other analog delay pedals. This includes ‘Rubbernecking’, a feature which allows the delay repeats to be

stretched or compressed in time; Repeats Oscillation, a feature that provides a secondary delay feedback

setting for creating momentary run away oscillation effects; and a Loop Send/Return jack for adding effects

to the delay feedback signal path.

The FOOTSWITCH input jack allows a DigiTech

FS3X Footswitch to be connected for hands-free control of

Rubbernecking, Modulation on/off, and Tap Tempo/Regen.

The Rubberneck Analog Delay pedal is all you need for that truly classic analog delay sound, with modern

feature enhancements to transport your delay effects into the future.

FEATURES

• Up to 1.5 Seconds of Delay Time

• Unique Rubberneck Time Stretching Feature

• Controls for Time, Repeats, Level, Mod Rate, Mod Depth, Gain, Tone, Rubberneck Rate, & Regen Adjust

• Tap Ratio Toggle Switch for Selecting Delay Feel

• Tails Switch

• Effect On/Off Footswitch (Also Enables the Rubbernecking Feature)

• Tempo/Regen Footswitch for Tap Tempo & Momentary Delay Feedback Changes

• 1/4” Mono Input & Output Jacks

• Footswitch Input Jack for Additional Hands-Free Control

• Loop Send/Return Jack for Adding Effects to the Feedback Path

• True Bypass

• 9VDC Operation (Optional Power Supply Required)