User Manual

USING LOOKING GLASS:
Most guitarists/bassists will favor placing the Looking Glass at the
beginning of their chain of eects, so start with that placement.
A typical eects signal chain will consist of Overdrive eects rst
then Modulation eects (Chorus, Flanger, Phaser, Tremolo, etc...)
next and then nally Time based eects (Delay and Reverb).
Placing the Looking Glass toward the front of your chain or eects
will preserve the vibe no matter the pedal combination that
follows. That being said you are always free to experiment with
dierent eect placements.
SPECIFICATIONS:
Input 1/4” TS Unbalanced - 260 kΩ (DIP 1 set to on)
235 kΩ (DIP 1 set to o)
Output 1/4” TS Unbalanced - 1 kΩ
Current Draw 4 mA
Bypass True Bypass
Power 9VDC alkaline battery (not included)
HARMAN PS0913DC power adapter (optional)
Warranty 1 Year
DOD
10653 River Front Parkway
South Jordan, UT 84095
USA
801-566-8800
Rev A - 2/16