User manual

5
1.2.2 BASIC WORKING PARAMETER
item parameter remark
Voltage input 19V DC 19V.
Voltage outputfor
camera
12V!+/-0.2$ 12V, 1A.
Video impedance
input
75 75 each channel.
Video output 1Vp-p 1Vp-p CVBS signal
0—2V Low voltage alarm
I/O
5V-30v Hight voltage alarm
RS232 serial port, for extend use
RS485 Connect to PTZ, (Pelco-D,Pelco-P)
SATA HDD One SATA with all capability
1.3 ENTIRONMENT ADAPTABILITY
For the saftly using DVR and prolong device life, please pay attention on following detail:
1) When installing device, please comply all the electric product safty criterion;
2) Power and ground:
u Do not touch the power and DVR with a wet hand
u Do not drop liquid on DVR
u Do not put others on DVR
u Please using soft dry cloth when clean DVR, do not using chymistimpregnant
u When the power line connects with jack, even don’t startup device. There is still have
voltage
u If you do not use device for long time, please take the power line away from jack.
www.digitalworld.ro Tel. [phone]
DigitalWORLD