User manual

49
3 The power line or date line may have broken.
4 HDD has broken.
5 The SATA interface has broken.
5/ Q: What is the meaning when show a “R”“M”“I”“H” in live view.
Aw
1 “R” means device is recording now.
2 “M” means this channel has triggered motion detect.
3 “I” means this channel has triggered I/O alarm.
4 “H” means no HDD or HDD is full.
60 Q: Some problems about real time video, such as video color, brightness
distortion and so on.
Ax
1 Please select the correct video type, NSTC or PAL.
2 The impedance between DVR and monitor is not match.
3 The transmit distance is too long and the signal has much attenuation.
4 The setting for color and brightenss is incorrect.
71 Q: No audio output.
Ay
1 Please check the audio input whether is ok.
2 Make sure you have opened audio input switch.
3 Hardware broken.
82 Q: Live view has audio, but no audio in playback.
Az
1 Audio record switch is not open.
2 Make sure the mute switch in playback is off.
93 Q: Date/time is incorrect.
A{
1 Didn’t prss “MODIFY SYSTEM DATE/TIME” when you changed the date and
time.
www.digitalworld.ro Tel. [phone]
DigitalWORLD