User manual

27
4) Create a mane you need, then press apply; now you have Registered a host name
success.
For example:
1, Network: ADSL, only one DVR need to connect to internet.
1) Make sure the DVR has connected to ADSL modem success; the LED is flashing means
success.
2) Network type: PPPoE
3) Input media port and web port, default value is 9000 and 0080
4) Type in the PPPoE user name and password from internet manufacture.
5) Fill in the IP of DNS sever, such ase202.96.128.166
6) Since the public IP will change after restart, please use DDNS function, and mapping the
public IP to a fixed domain name, as the picture.
7) Save and restart device, it will connect to internet via PPPoE mode automatically, if success,
it will got a dynamic public IP.
8) ping xxx.xxx.xxx.xxx(The public IP of DVR) to check whether the network is ok, and ping
xxx.xxx.xxx!the domain name of DVRfto check whether the DDNS settings is ok.
9) Open IE browser, and type in the domain name of DDNS (if WEB port is not 80, you should
add a port, such as:http://members.3322.org:8088 )
Please download the IE control, then enter into login interface, the default setting has no
password.
2. Network: ADSL, a number of DVR need to connect to internet.
1. Make sure your ADSL router support a number of DVR to connect to internet at the same
time.
2. Connect DVR to ADSL router correctly as the manual.
3. Start-up the PPPoE functions of ADSL router, and start to dialing to connect to internet.
4. Please turn off the DHCP function of the router; the network mode of both DVR and pc
should be static. Remark: All the sub mask, gateway and DNS of DVR, PC and rout should
in the same net field, as follow:
www.digitalworld.ro Tel. [phone]
DigitalWORLD