User manual

21
STATUS:Each channel has corresponding channel switch, press VEnter to turn on or turn off the
motion detection for each channel..
SNESITIVITY:each channel has corresponding sensitivity setting,including four standards
high,higher,medium and low, pressWEnter key to switch
MD AREA: each channel has corresponding regional motion detecting setting,move the cursor
to correspondingXsetting ,pressYEnter to enter regional setting interface, red area means it have
activated motion detection, transparent block means it have not activated motion detection.
Move the direction key on romote control to make cursor move in the small pane, green
frame means the cursor has moved to this pane, pressZEnter to select or cancel motion
detection of this small pane, when setup finished, press[exit to back to MD setup interface, it will
save automaticly.
Remark:
IR Operation: press [Menu] key to select or cance all the screen.
Mouse operation: click left and drag the frame to setup the region for motion detection.
2.2.3.10 MOBILE
Move the cursor to\MOBLE !Icon highlighted when selected],press^Enter to enter into
setting interface.
www.digitalworld.ro Tel. [phone]
DigitalWORLD