User manual

20
N.O: indicate I / O input level from high to low effective
N.C: indicate I / O input level from low to high effective
HDD LOSS:ON means it will trigger a alarm if there is no HDD, and it will display an LH
On the bottom left of channel 1 in the live view
HDD SPACE: ON: If the space less than 500M, there is a remark in live view: No enough space,
please change HDD after shutdown.
VIDEO LOSS: ON: when one channel has no video input, it will display “video loss”in live view.
ALARM MANAGE: There are alarm output, buzzer and post REC three items.
OUTPUT: when an alarm triggered, the alarm output time will be:
0 secondM10 seconds,20 seconds,40 seconds and 60 seconds
N BUZZER:buzzer calling time setup when alarm triggered: 0 second,10
seconds,20 seconds,40 seconds and 60 seconds
N POST REC.:post recording time setup: 30 seconds,1 minute,2 minutes and 5
minutes
EMAIL SETUP: not finished yet.
2.2.3.8 SYSTEM INFO
Move the cursor to OSYSTEM INFO !Icon highlighted when selectedP,pressQEnter to enter
into setting interface, at this interface mainly display system hardware features and firmware
version, include : device type, software version, MAC addressRserial number.
2.2.3.9 MOTION DETECT
Move the cursor toSMOTION DETECT !Icon highlighted when selectedT,pressUEnter to
enter into setting interface.
www.digitalworld.ro Tel. [phone]
DigitalWORLD