Installation guide

DL-HDM44 Installaon Guide
15
Front Panel and IR Remote Operaon
Front Panel Operaon
To set a route using the front panel of the DL-HDM44, press the desired output buon (display) unl the
preferred input source is selected.
If output B is currently viewing input 4, the output B buon
would need to be pressed three mes to view the content on
input 3.
IR Remote Operaon
The buons on the IR remote will allow direct roung of inputs to a specic output. The Power buon will
send the matrix to a low power state. Pressing the Power buon a second me will restore the DL-HDM44 to
full power.
OUTPUT
B 1 2 3 4
OUTPUT
D 1 2 3 4
OUTPUT
C 1 2 3 4
OUTPUT
A 1 2 3 4
POWER