Installation guide

DL-HDM44 Installaon Guide
10
Installaon Instrucons
Quick Start
Mount the Matrix
Shelf Mounng Instrucons
Rack Mounng Instrucons
1. Mount the matrix
2. Connect sources
3. Connect displays
4. Connect control (oponal)
5. Apply power
At least 2 inches of free air space is required on both sides of the DL-HDM44 for proper side venlaon. Avoid
mounng the DL-HDM44 near a power amplier or any other source of signicant heat.
Rubber shelf feet are already aached to the boom of the DL-HDM44 to help accelerate the installaon of
the DL-HDM44.
Remove the rubber feet from the boom of the matrix. Remove
the larger two screws on both sides of the DL-HDM44.
Aach the supplied rack ears to the sides of the DL-HDM44
matrix. The matrix requires one rack unit (1 RU) of space. It is
recommended that you leave an empty rack space above and
below the DL-HDM44 for addional cooling.