Specifications

84
DCS-3950 series Ethernet switch manual
Command Explanation
Global Mode
tftp-server transmission-timeout
<seconds>
Set maximum retransmission time within
timeout interval.
（3）Modify TFTP server connection retransmission time
Command Explanation
Global Mode
tftp-server
retransmission-number <number>
Set maximum retransmission time within
timeout interval.
5.5.2.2.2 FTP/TFTP Configuration Command List
5.5.2.2.2.1 copy（FTP）
Command: copy <source-url> <destination-url> [ascii | binary]
Function: Download files to the FTP client.
Parameter：<source-url> is the location of the source files or directories to be
copied ;<destination-url> is the destination address to which the files or directories to be
copied;forms of <source-url> and <destination-url> vary depending on different
locations of the files or directories. ascii indicates the ASCII standard will be
adopted;binary indicates that the binary system will be adopted in the file transmission
（default transmission method）.When URL represents an FTP address, its form should
be: ftp://<username>:<password>@{<ipaddress>}/<filename>,amongst <username> is
the FTP user name,<password> is the FTP user password,<ipaddress>is the IP address
of the FTP server/client, <filename> is the name of the FTP upload/download file.
Special keywords of the filename:
Keywords Source or destination addresses
running-config
Running configuration files
startup-config
Startup configuration files
nos.img
System files
nos.rom
System startup files
Command mode: Admin Mode
Usage Guide: This command supports command line hints,namely if the user can enter
commands in following forms: copy <filename> ftp:// or copy ftp:// <filename> and
press Enter,following hints will be provided by the system：
ftp server ip address [x.x.x.x] >
ftp username>
ftp password>
ftp filename>
Requesting for FTP server address, user name, password and file name.
Examples:
（1）Save images in the FLASH to the FTP server of 10.1.1.1,user name is