Specifications

217
DCS-3950 series Ethernet switch manual
Command mode: Port Mode
Usage Guide:
The command is only working under global multicast destination-control enabled,
after configuring the command, if IGMP-SPOOPING is enabled, for adding the interface
to multicast group, and match configured access-list, such as matching: permit, the
interface can be added, otherwise do not be added.
Example:
Switch(Config)#interface ethernet 0/0/1
Switch(Config-Ethernet0/0/1)#ip multicast destination-control access-group 6000
13.2.2.6 ip multicast destination-control access-group (vmac)
Command: ip multicast destination-control <1-4094> <macaddr >access-group
<6000-7999>
no ip multicast destination-control <1-4094> <macaddr >access-group
<6000-7999>
Function: Configure multicast destination-control access-list used on specified vlan-mac,
the ‘no ip multicast destination-control <1-4094> <macaddr >access-group
<6000-7999>‘ command deletes this configuration.
Parameter: <1-4094>: VLAN-ID;
<macaddr>: Transmitting source MAC address of IGMP-REPORT, the
format is ‘xx-xx-xx-xx-xx-xx’;
<6000-7999>: Destination-control access-list number.
Default: None
Command mode: Global Mode
Usage Guide: The command is only working under global multicast destination-control
enabled, after configuring the command, if IGMP-SPOOPING is enabled, for adding the
members to multicast group. If configuring multicast destination-control to source MAC
address of transmitted igmp-report, and match configured access-list, such as matching:
permit, the interface can be added, otherwise do not be added.
Example:
Switch(Config)#ip multicast destination-control 1 00-01-03-05-07-09 access-group 6000
13.2.2.7 ip multicast destination-control access-group (sip)
Command: ip multicast destination-control <IPADDRESS/M> access-group
<6000-7999>
no ip multicast destination-control <IPADDRESS/M> access-group
<6000-7999>
Function: Configure multicast destination-control access-list used on specified net
segment, the ‘no ip multicast destination-control <IPADDRESS/M> access-group
<6000-7999>‘ command deletes this configuration.
Parameters: <IPADDRESS/M>: IP address and mask length;;
<6000-7999>: Destination control access-list number.