Specifications

158
DCS-3950 series Ethernet switch manual
Function: Set association of Private VLAN. If no is put in front of the command, Private
VLAN association will be removed.
Parameters: <secondary-vlan-list> is the list of Secondary VLANs which are associated
with the Primary VLAN. There can be two kinds of Secondary VLAN, the Isolated VLAN
and the Community VLAN. And multiple VLANs can be separated by ‘;’
Command mode: VLAN configuration mode.
Default: No association for Private VLAN is defined by default.
Usage Guide: Before setting Private VLAN association, three types of Private VLANs
should have no member ports; the Private VLAN with Private VLAN association can’t be
deleted. When users delete Private VLAN association, all the member ports in the Private
VLANs whose association is deleted are removed from the Private VLANs.
Example: Associate the Isolated VLAN200, and the Community VLAN300 to the Primary
VLAN100.
Switch(Config-Vlan100)#private-vlan association 200;300
9.2.3 Typical VLAN Application
Scenario: