Specifications

103
DCS-3950 series Ethernet switch manual
enable password level {visitor|admin}
To set the password for logging to the
configuration mode.
5.7.2.2 Classified Configuration Command list
5.7.2.2.1 Enable
Command: Enable [level {visitor|admin} [<password>]]
Function: Specify the security level for a user to access the switch, guest vistor or
administrator.
Parameters: <password> is the corresponding password.
Command mode: Normal user mode
Default: switch is accessed as admin by default.
Usage Guide: If the password is set, but not input when login, password will have to be
entered through interactive interface.
Example: Enable the admin configuration mode with visitor identity, and password is
Password.
Method 1:
SWITCH>enable level visitor SWITCH
SWITCH#
Method 2:
SWITCH >enable level visitor
Password:*** <--------------Input Password
SWITCH#
5.7.2.2.2 Enable password level
Command: Enable password level {visitor|admin}
Function: Enable passwords for configuration login
Command mode: Global Mode.
Default: No password is configured by default.
Usage Guide: With this command, users will be interactively prompted to input current
password, the new password, and the confirmation. Password can be set to empty in
order to disable the passwords.
Example: Set the password of vistor to be Password
switch(config)#enable password level visitor
Current password:
New password:*** <------------- Password
Confirm new password:*** <------------- Password
5.7.2.2.3 No enable password level
Command: no enable password level {visitor|admin} [<enable_password>]