Installation Instructions

43 DVB-S Receiver
GB
2. Connect master receiver or PC to the slave receiver via serial interface (0-Modem
cable). Enter the “Software Upgrade” menu of the master receiver and press
[Vol
] to change the upgrade mode. Upgrade modes include: All code / Main code
/ CAS-data / Script GUI / Radio Back / default DB / Userdb.
3. Switch on the slave receiver.
4. Mark “Start” on the master reeciver and press [OK] to start upgrade.
Wait until the display on the front panel shows “-END”. Then switch off the receiver
and on again. Now the new software is used.
5. Press [MENU] to save the setting without upgrade.
6.5.2 Upgrade by Satellite
This function can upgrade the software of
your receiver through data sent by a satellite.
At the moment we offer satellite updates
only through ASTRA1 and Hotbird satellites.
1. Select the satellite and TP or input the TP
value and download PID.
2. Then mark “Start” and press [Enter] to
begin the download of the upgrade. This
may need up to 60 minutes. Therefore we
suggest using of this function only if you
don’t intent to watch TV during this time
6.5.3 Upgrade
This option allows updating the software of
the receiver with the received data from a
USB memory device. To do it, connect a USB
memory device to the receiver and accede to
this menu option.
The last software version to be loaded must
be placed at the root path of your USB
device.
1. Update fi le: Select with [Vol
], the name
of the fi le to be choosed.
2. Select “Start” and press [OK]. An alert
message appears indicating not to take
out the memory device during the loading
process.
6. TOOLS