Installation Instructions

42
Installation Guide
GB
6.4 Factory Default
When you press [OK] on the “Factory
Default” item:
1. A dialogue box will occur where you need
to enter the password.
2. After you input the correct password a
warning message will be displayed like the
one beside.
3. If you select “Yes” then all changes you
made will be reset to default values. Make
sure you really want to do this!
4. Press [Exit] in both steps will close the
window without resetting the receiver.
6.5 Software Upgrade
When you enter to “Software Upgrade”
menu, you will see a screen like beside:
1. Press [CH ] to select the wanted
item among Software Upgrade and Up-
grade by Satellite.
2. Press [OK] to enter the selected item.
6.5.1 Software Upgrade
1. This function allows you to upgrade the
software of the receiver. This can be done
from PC to receiver or from a master
receiver to a slave receiver.
6. TOOLS