Installation Instructions

35 DVB-S Receiver
GB
• When you select “TV Channel / Radio Channel”(timer setting for channel
change and Wakeup channel / date) then you have further options you need
to set:
Wakeup Channel: Press [OK] to enter the channel list, and select the channel
you want to see with [CH
] press [OK] to confi rm it.
Wakeup Date: Use number buttons to input your wakeup date.
On Time: Use number buttons to input your wakeup time. If date and time are
reached then no matter if the system is in standby mode or in playing mode, it
will automatically switch to the channel you set and start to play.
Duration: Here you can set the time you want to see or play this channel. When
the time is reached, whenever the system is in standby mode or playing a
channel, the system will automatically switch to the channel you select and
play the channel within the duration time you set. The minmum duration unit is
one minute. After the duration time, the system will automatically switch to
Standby mode.
• When you select “Message”(reminding message) option in “Timer Service” then
you can enter additional data:
Wakeup Message: Press [Vol ] to select the category
of the wakeup message from Birthday, Anniversary and General.
Wakeup Date: Use the [Number] buttons to input your wakeup date.
On Time: Use the [Number] buttons to input your wakeup time. If date and time
are reached, no matter if the system is in standby mode or in playing mode, it
wil automatically show a reminding message. The message will be displayed on
the screen until you press [Exit] to close it.
Duration: Here you can set the time you want to see or play this channel. When
the time is reached, whenever the system is in standby mode or playing a
channel, the system will automatically switch to the channel you select and play
the channel within the duration time you set. The minmum duration unit is one
minute. After the duration time, the system will automatically switch to Standby
mode.
• Press [Exit] to leave the “Timer” menu
2. Local Time Setting: When you select
“Local Time Setting” and press [OK] then
you will see a window like the one beside:
• GMT Usage: This item is used to set
the time by using the time signal from
the satellite. Press [Vol ], to
change the setting.
• The “GMT Offset” item is only available
when “GMT Usage” is set to “On”. Press
[Vol
], to set the “GMT Offset”
value. With every time you press the
button the time offset will be
increased/decreased by half an hour.
5. SYSTEM SETUP