Installation Instructions

27 DVB-S Receiver

! Notice:

After choosing LNB type “Universal” you cannot modify 22K.

DiSEqC1.0:

Use [Vol ] to switch the options or press [OK] to open the DiSEqC1.0 option list to

select directly with [CH ] , press [OK] to conﬁ rm it.

DiSEqC1.1:

Use [Vol ] to switch DiSEqC1.1 option or press [OK] to enter DiSEqC1.1 option to

select directly with [CH ] , press [OK] to conﬁ rm it. The options of this item are:

Disable / CCard1 M1 Port1 / CCard1 M1 Port2 / CCard1 M1 Port3 / CCard1

M1 Port4 / CCard1 M2 Port1 / CCard1 M2 Port2 / CCard1 M2 Port3 / CCard1

M2 Port4 / CCard1 M3 Port1 / CCard1 M3 Port2 / CCard1 M3 Port3 / CCard1

M3 Port4 / CCard2 Port1 / CCard2 Port2 / CCard2 Port3 / CCard2 Port4 /

CCard2 Port5 / CCard2 Port6 / CCard2 Port7 / CCard2 Port8 / CCard2 Port9

/ CCard2 Port10 / CCard2 Port11 / CCard2 Port12 / CCard2 Port13 / CCard2

Port14 / CCard2 Port15 / CCard2 Port16.

Positioner:

Press [Vol ] to select between “Off / DiSEqC1.2 / USALS”.

! Notice:

When you select “DiSEqC1.2 or USALS”, “DiSEqC1.0” and “DiSEqC1.1” items will be

disabled.

Polarity:

Press [Vol ] to switch between “Auto / H / V ”.

Toneburst:

Press [Vol ] to switch this function “On” or “Off”.

3. DiSEqC1.0 4Port: Use [Vol ] to switch the options of DiSEqC1.0. Between Disable /

LNB1 / LNB2 / LNB3 / LNB4.

4. TP Index: Use [Vol ] to select the desired transponder or press [OK] to open the

TP list to select directly with [CH ] , press [OK] again to display the TP number

where the channel can be found.

5. FTA Only: Press [Vol ] to select to scan only free channels or even scrambled chan-

nels. If you select “Yes” it will scan free channels only.

6. Scan Channel: Press [Vol ] to select to scan TV + radio channels, or just TV chan-

nels or just radio channels.

7. Scan Mode: You can select “Auto Scan”, “Preset Scan” or “NIT Search” to blind scan

preset transponders or network transponders of the selected satellite.

8. Search: Press [OK] to start scanning. In the lower part of the window the progress of

scanning and the found channels are displayed.

4. INSTALLATION