Installation Instructions

26
Installation Guide
GB
After selecting the installation menu you can
see the window like beside.
In “Installation” menu;
1. Press [CH ] to select menu items
among Single Search, Multi Search, TP
Scan, Satellite List, TP List and Satellite
Guide.
2. Press [OK] to enter the selected item.
4.1 Single Search
After selecting “Single Search” you will see a
window like beside:
1. In the “Satellite” item press[Vol ] to se-
lect the satellite which you want to scan
or press [OK] to open the “satellite list” to
select directly with [CH ] , press [OK]
to confi rm it.
2. LNB Confi guration: Press [OK] to enter
LNB confi guration, you will see a window
like beside:
LNB Type: Press [Vol ]
to switch among “Standard”, “User” and
“Universal” mode.
For Example: If you use a Dual LNB, then
you should select “User” option in “LNB
Type” and set the correct frequency in
LNB type.
22K:
Use [Vol ] to switch “ON” and “Off”. The
22KHz signal is used in KU universal LNBs
to change between low band and high
band..
4. INSTALLATION