Installation Instructions

9 DVB-T Receiver

2.1 Power

1. Press [Power] button to switch from TV mode to Standby mode

2. In Standby mode press [Power] button again to switch back to TV mode. The last active

channel will be showed.

3. To switch off the STB complete press the main power button.

2.2 TXT

1. Press [TXT] button in TV mode to open the teletext page. This service is depending on

the support of the channel provider.

2. If the channel does not support teletext information, it will show “No Teletext Data” on

the screen.

2.3 Mute

1. Press the [Mute] button to mute the sound. On the screen an icon will be displayed to

indicate the muted sound.

2. Press the [Mute] button again to restore the sound.

2.4 Number

In TV mode you can enter the channel number directly with your remote control unit and

confirm the number with the OK button to change to the desired channel.

2.5 M/P (Multi-Pictures)

In full screen, press [0] key can enter the Mul-

ti-Pictures mode like below:

1. In Multi-Pictures mode, the screen will

display 9 channels’ preview window (static)

from the current channel. And

only the highlight preview program can play

normally.

2. HOTKEY