Installation Instructions

28Installation Guide

6.7 Parental Lock

You can set a password for anyone who wishes to operate in the “Installation” menu. And

you can also set the password for the lock channels. (How to set the lock channel please

refer to LOCK) Here will show you how to setting and how to revising the password.

1. In “Parental Lock” function, press [OK]

key, there will pop an dialogue for you to

input the password. The default password

is “0000”. When you input the correct

password, you will see a screen like right:

2. Menu Lock determining that when user

wish to enter “Installation” menu, whether

have to input password or not. If the setting

of “Menu Lock” is “Yes” which means user

have to key in password, set “No” means

unlock.

3. Channel Lock determining that when user wish to play the lock channels, whether have

to input the password or not. If the setting is “Yes”, play the channels with lock mark will

show up a dialogue on the screen and ask for the password. If the setting of “Channel

Lock ” is “No”, the Lock function will invalid.

4. New Password is used for revising password; you can input the new password in this

item by using number keys directly. After you filled in 4 digital numbers, the highlight

will auto skip to Confirm Password and ask you to input the new password again. If

the password is correct, the screen will show up a message of “Change password

successfully”. After finish saving and draw back to “System Setup” menu, the revising

is complete.

5. Press [Exit] key to exit the current menu.

6. SETUP