Installation Instructions

24Installation Guide
GB
6.2 TV System
When you enter to “TV System” menu, you will
see the screen like right:
1. Display Mode is use for switching the
screen-displaying mode. Now we provide
below options: Auto / PAL-M / PAL-BG /
NTSC/ PAL-N. You can press [ / ] key to
select each mode circularly.
2. Aspect Mode is used for switching the
screen aspect ratio mode. Now we provide
below options: 4:3 PS / 4:3 LB / 16:9
/ Auto. You can press [ / ] key to select
each mode circularly.
3. Dolby Digital can select AC3 on or off.
4. Video Output is use for switching the video output mode. Now we provide below options:
CVBS, CVBS+RGB. You can press [ / ] key to select each mode circularly.
5. LCN Mode can control the channel whether sort by the sequence information in the
streams. The options is: On / Off. With [ / ] key to select each mode circularly.
6. Press [Exit] key to draw back from “TV System” menu.
6.3 Start up Service
When you enter to “Startup up Service” menu,
you will see the screen like right:
1. If the setting of “Boot on Channel” is “On”,
it means the following two items can be
work. If the setting is “Off”, it means the
“Boot on Channel” function can’t work.
2. In the “Mode” item, you can set the “Startup
Channel” as “TV” mode or “Radio” mode.
3. In “Start up Service” menu, you can press
[OK] key to open the service list, and select
the channel that you want it to startup,
press [OK] key again to confirm.
4. Press [Exit] key to draw back from “Channel
Setup” menu.
6. SETUP