Installation Instructions

21 DVB-T Receiver
GB
When you enter to “Installation” menu, there
will display the screen like right:
In “Installation” menu;
1. Press [CH ] key to select menu pages
among Auto Scan, Channel Scan, Channel
Setup and Aerial Adjustment.
2. Press [CH ] key to select menu items
among each items.
3. Press [OK] key to enter the selected item.
5.1 Auto Scan
When you enter to “Auto Scan” menu, there
will display the screen like right:
1. Firstly please select the country in System
Setup Menu / Region and Time / Region
2. In “Scan Mode” item, press [ / ] key to
select scans all channels or just scans free
channels.
3. Moving the highlight to “Search” item and
press [OK] key to start scanning.
4. In the “Auto Scan” menu, press [Exit] key to
draw back from the scanning.
5.2 Channel Scan
When you enter to “Channel Scan” menu,
there will display the screen like right:
1. There is two mode. You can scan channel
by channel or by frequency”.
2. When scan band is UHF, the range of Ch
No. is from 21 to 69. When scan band is
VHF, the range of Ch No. is from 5 to 13.
3. When you complete your modification,
move highlight to “Search” item and press
[OK] key, then it will begin to scan.
4. In the “Channel Scan” item, press [Exit] key
to exit the scanning and save the current
parameters.
5. INSTALLATION