Operation Manual

23 DVB-S Receiver
GB
3.3 CHANNEL SETUP
When you enter the “Channel Setup” menu
you will see a screen like beside:
1. Startup Channel: Press [OK] to enter
“Startup Channel” menu to see the screen
like showed beside:
• If you set of “Boot on Channel” to “On” you
can edit the following two items. If the set-
ting is “Off” the box always starts with the
channel that was running when the box
has been switched off.
• On the “Mode” item you can select either
“TV channel” or “Radio channel”.
• On “Startup Channel” item you can open
the channel list by pressing [OK]. Then
you can select the channel of you choice.
Press [OK] again to confirm.
2. Channel Play type: Use [CH▲/▼] to select,
press [OK] to enter “Channel Play Type”
menu. Here you can select the “playing
channels” as “All”, “Free” or “Scrambled”
with [Vol◄/►].
3. If you select “Free” then all scrambled
channels will be skipped when you change
channels with [Vol◄/►].
4. Press [EXIT] to leave the “Channel Setup”
menu.
3.4 FAVORITE GROUP LIST NAME
When you enter “Favorite group list name”
menu with 32 favorite group will be displayed,
press [OK] on the RCU to rename favorite
group. Use [CH▲/▼] / [Vol◄/►] to select
character, press [OK] to confirm it.
3. CHANNEL