Operation Manual

24
Installation-Guide
GB
After modification select “OK” of button bar and press [OK] on the RCU to rename the
favorite group name and leave the edit mode. Press [EXIT] on the RCU to exit the edit
mode without saving the favorite group name.
3.5 DELETE ALL
To delete all channels:
1. Enter the password. The default password
is “0000”.
2. After entering the password correct a
safety question will show up where you
have to confirm first
3. Select “OK” to delete all channels or “Can-
cel” to cancel the operation and confirm
with [OK].
4. In step 1 and step 2, pressing [MENU] will exit the function directly without saving.
? Frequently Asked Question
Q: IF I incautiously delete all channels, what should I do?
A: there are two ways to restore:
• To research all channels in the “Installation” menu.
• Use “Factory Default” function to restore all channels in the “Tools” menu.
3.6 RESET THE PROGRAM LIST AND SETTINGS
Go to: Menu/Others/Factory Setting
1. Enter the password. The default password is “0000”.
2. After entering the password correct a safety question will show up where you have to
confirm first.
3. Select “OK” to delete all channels or “Cancel” to cancel the operation and confirm with
[OK].
4. In step 1 and step 2, pressing [MENU] will exit the function directly without saving.
3. CHANNEL