Manualshelf

Operation Manual

ManualsBrandsDigitalbox ManualsDigital ReceiverIMPERIAL DB 2 max
81828384858687888990
26
Installation-Guide
GB
Type” and set the correct frequency in LNB type.
•22K: Use [Vol ] to switch “ON” and “Off”. The 22KHz signal is used in KU universal
LNBs to change between low band and high band.
Notice: After choosing LNB type “Universal” you cannot modify 22K.
• DiSEqC1.0: Use [Vol ] to switch the options or press [OK] to open the DiSEqC1.0
option list to select directly with [CH ], press [OK] to confirm it.
•DiSEqC1.1: Use [Vol ] to switch DiSEqC1.1 option or press [OK] to enter
DiSEqC1.1 option to select directly with [CH ], press [OK] to confirm it.
The options of this item are: Disable/CCard1 M1 Port1/CCard1 M1 Port2/
CCard1 M1 Port3/CCard1 M1 Port4/CCard1 M2 Port1/CCard1 M2 Port2/
CCard1 M2 Port3/CCard1 M2 Port4/CCard1 M3 Port1/CCard1 M3
Port2/CCard1 M3 Port3/CCard1 M3 Port4/CCard2 Port1/CCard2 Port2/
CCard2 Port3/CCard2 Port4/CCard2 Port5/CCard2 Port6/CCard2
Port7/CCard2 Port8/CCard2 Port9/CCard2 Port10/CCard2 Port11/
CCard2 Port12/CCard2 Port13/CCard2 Port14/CCard2 Port15/CCard2
Port16.
• Positioner: Press [Vol ] to select between “Off/DiSEqC1.2/USALS”.
Notice: When you select “DiSEqC1.2 or USALS”, “DiSEqC1.0” and “DiSEqC1.1”
items will be disabled.
• Polarity: Press [Vol ] to switch between “Auto/H/V ”.
• Toneburst: Press [Vol ] to switch this function “On” or “Off”.
3. DiSEqC1.0 4Port: Use [Vol ] to switch the options of DiSEqC1.0. Between Disable/
LNB1/LNB2/LNB3/LNB4.
4. TP Index: Us [Vol ] to select the desired transponder or press [OK] to open the TP
list to select directly with [CH ], press [OK] again to display the TP number where
the channel can be found.
5. FTA Only: Press [Vol ] to select to scan only free channels or even scrambled
channels. If you select “Yes” it will scan free channels only.
6. Scan Channel: Press [Vol ] to select to scan TV + radio channels, or just TV channels
or just radio channels.
7. Scan Mode: You can select “Auto Scan”, “Preset Scan” or “NIT Search” to blind scan
preset transponders or network transponders of the selected satellite.
8. Search: Press [OK] to start scanning. In the lower part of the window the progress of
scanning and the found channels are displayed.
3. CHANNEL