Operation Manual

Installation-Guide

4.6 SATELLITE GUIDE

When you enter “Satellite Guide” menu, you

will see the screen like beside:

Here you can enter your local longitude and

latitude and the satellite’s longitude. The

receiver calculates the antenna’s orientation

and elevation to point your antenna to the

selected satellite.

1. Use the [NUMBER] buttons to input the

values of “Local Longitude”, “Local Latitude”

and “Satellite Longitude”.

2. In the “Calculate” item press [OK], the receiver auto calculates the antenna’s

orientation and elevation to point your antenna to the selected satellite.

3. Press [MENU/EXIT] to return to the previous menu.

4.7 UNICABLE CONFIGURATION

Here you have two way to detect the frequen-

cy of Unicable LNB:

1. Manual Conﬁg: Press [OK] and you will see

below Menu. Here you need to know the IF

Channel and IF Frequency of the Unicable

LNB you are using, then press [Vol◄/►] to

choose the IF Channel and IF Frequency ac-

cordingly, then press “Exit” for saving data.

2. Auto Conﬁg: just press [OK], and you will

see below window, after the massage

disppear, press [Vol◄/►] to choose the

frequency, then (EXIT).

3. Installation / Single search / LNB Conﬁgu-

ration / LNB type

Settings must be as below:

LNB type: Unicable

First Frequency: 9750MHz (press [Vol◄/►] to choose)

Sencond Frequency: 10600MHz. (press [Vol◄/►] to choose)

Save all above settings, and back to “Single Search” Menu, and start to search.

4. INSTALLATION