Operation Manual

Installation-Guide

4. Subtitle Language: In “OSD Setting”menu, use [Vol ] to select “On” or “Oﬀ”. If the

current channel has subtitle information, it will be displayed if this function is “On”. If this

function is “Oﬀ” subtitles won’t be displayed. The selections of subtitle language include:

English, German, French, Spanish, Italian, Portuguese, Turkish, Polish, Russian, Danish,

Greek, Hungarian, Arabic and Farsi.

5. Teletext: Press [TTX] button in TV mode to open the teletext page. This service is de-

pending on the support of the channel provider. If the channel does not support teletext

information, it will show “No Teletext Data” on the screen. The selections of teletext

language include: English, German, French, Spanish, Italian, Portuguese, Turkish, Polish,

Russian, Danish, Greek, Hungarian, Arabic and Farsi.

6. Press [MENU/EXIT] to return back from “Language” menu.

5.2 TV SYSTEM

When you enter the “TV System” menu you

will see the screen like below:

1. Display Mode is used to switch the display

mode. You can select from Auto/PAL/

PAL-M/PAL-N/NTSC3.58/NTSC4.43.

Press [Vol ] to switch the desired mode.

2. Aspect Mode is used to switch the screen

aspect ratio mode. You can select the

needed mode from Auto/4:3 PS/4:3

LB/16:9 with [Vol ].

3. Video output is use for switching the screen aspect ratio mode. Now we provide below

options: CVBS/CVBS + RGB/CVBS + S-Video. You can press [Vol ] key to select

each mode circularly.

5. In HDMI Mode, you can choose the number of lines and the scan mode of the video sig-

nal you are sending by the HDMI connector. press [VOL◄/►] key, select among: 576P

/ 480P / 576 I / 480 I. (P: Progressive, I: Interleaved)

Note: If you have the HDMI output connected and you select the progressive mode, the

SCART output is automatically disabled.

6. Press [MENU/EXIT] to return to the previous menu.

5. SYSTEM SETUP