Operation Manual

36
Installation-Guide
GB
5. SYSTEM SETUP
• Whenyouselect“Message”(remindingmessage)optionin“TimerService”thenyou
can enter additional data:
• WakeupMessage:Press[Vol ] to select the category
• ofthewakeupmessagefromBirthday,AnniversaryandGeneral.
• WakeupDate:Usethe[NUMBER] buttons to input your wakeup date.
• OnTime:Usethe[NUMBER] buttons to input your wakeup time. If date and time
are reached, no matter if the system is in standby mode or in playing mode, it will
automatically show a reminding message. The message will be displayed on the
screen until you press [EXIT] to close it.
• Duration:Hereyoucansetthetimeyouwanttoseeorplaythischannel.Afterthe
time set the system will automatically switch to standby mode. If you don’t want
the box the be switched to standby mode then set the duration to 00:00.
• Press[EXIT] to leave the “Timer” menu.
2. Local Time Setting: When you select “Local
Time Setting” and press [OK] then you will
see a window like the one beside:
• GMTUsage:Thisitemisusedtosetthe
time by using the time signal from the
satellite. Press [Vol ] to change the
setting.
• The “GMT Oset” itemisonlyavailable
when “GMT Usage” is set to “On”.
Press [Vol ] to set the “GMT Offset”
value. With every time you press the but-
ton the time offset will be increased/
decreased by half an hour.
• Summer:Press[Vol ] to switch this function “On” or “Off”.
• “Date” and“Time” items are only availablewhen the “GMT Usage” issetto “O”.
Press [Vol ] to select one item and use number buttons to input time and date
directly.
• TimeDisplay:Press[Vol ] to switch this function “On” or “Off”.
Note: If the current channel provides the correct time information, you will see the
current time after you entered “Local Time Setting” menu. If the channel doesn’t
provide time information, you have to input the date and time information manually.
The most channels support the time signal.
• Press[Exit] to leave the “Time” menu.
3. Sleep Timer: Select “Sleep Timer” item and press [OK] to set the sleep timer. You
will see “Sleep timer OFF/Sleep timer 10/Sleep timer 30/Sleep timer 60/
Sleep timer 90/Sleep timer 120”.
If you set a sleep time, the system will change to standby mode after the chosen time
period.