Operation Manual

37 DVB-S Receiver

5.4 OSD SETTING

When you select “OSD Setting” you will see a

screen like beside:

1. Subtitle Display: Press [Vol◄/►] to se-

lect “Oﬀ”, “Standard” or “Teletext Subti-

tle”. If the current channel has subtitle

information, it will be displayed if this

function is “Standard” or “Teletext

Subtitle”. If this function is “Oﬀ” subtitles

won’t be displayed.

2. OSD Timeout: This setting determines the duration the info window is displayed on the

screen when you change channels. Press [Vol◄/►] to set the time between 1 to 10

seconds.

3. Position: Press [Vol◄/►] select the position between top and bottom.

4. OSD Transparency: With this parameter you can set the transparency of the menus.

Press [Vol◄/►] select the value between 10%, 20%, 30%, 40% and “Oﬀ”(means no

transparency function).

5. Logo From USB: Press [Vol◄/►] to select “Oﬀ” and “On”. Set the image as background.

6. Load OSD Setting Default: If you want to reset your OSD settings to the default settings

then select this item and press [OK].

7. Press [EXIT] button to leave the “OSD Setting” menu.

5.5 Parental Lock

You can set a password for anyone who wish-

es to operate the “Installation” menu. You can

also set the password to lock channels. Below

you ﬁnd how to set and change the password.

1. On “Parental Lock” press [OK] to open a

dialogue box and input the password. After

you entered the correct password, you will

see a screen like beside:

2. Menu Lock: If Menu Lock is set to “Yes”

then you need to enter the password every

time you want to open the menu. If set to

“No” then you can open the menu without

entering the password ﬁrst.

5. SYSTEM SETUP