Operation Manual

39 DVB-S Receiver
GB
throught option (see point 5.2.) is STB master selected. By the other way, if you choose
VCR master, then the Low Power Consumption option will not be active and the receiver
will not be in LPC mode.
4. Press [EXIT] button to leave this menu.
5.7 SWITCH THE POSITION OF THE REMOTE CONTROL
If you use more than one STB you can switch the position of the remote control. So you
can avoid to interfering the operation of the other STB’s. There are 3 operations for this
setting: position 1, position 2 and position 3; the default setting is position 1.
In the battery case of the remote control unit you will find a selector switch for position 1,
2 and 3. This position must be the same which you have selected in the menu. For example:
You have selected position 1 in the menu so please position also the selector switch in the
battery case on position 1 (2 to 2, 3 to 3).
When you enter to “Tools” menu, you will see
a screen like beside:
In “Tools” menu:
1. Press [CH▲/▼] to select the wanted item
among Information, Quick Setup, Factory
Default and Software Upgrade.
2. Press [OK] to enter the selected item.
6.1 INFORMATION
1. When you select the “Information” menu
you will see a screen like beside. The screen
displays data about the current channel.
2. Press [EXIT] button to leave the informa-
tion display.
5. SYSTEM SETUP
6. TOLLS