Operation Manual

40
Installation-Guide
GB
6.2 QUICK SETUP
When the STB is used, which need to repeat
set menu Language, First Audio, Second Au-
dio, LNB Power, LNB2 Power, Single Search,
Multi Satellite Search and Main Menu.
6.3 FACTORY DEFAULT
When you press [OK] on the “Factory Default”
item:
1. .A dialogue box will occur where you need
to enter the password.
2. .After you input the correct password a
warning message will be displayed like the
one beside.
3. If you select “Yes” then all changes you
made will be reset to default values. Make
sure you really want to do this!
4. Press [Exit] in both steps will close the win-
dow without resetting the receiver.
6.4 SOFTWARE UPGRADE
When you enter to “Software Upgrade” menu,
you will see a screen like beside:
1. Press [CH▲/▼] to select the wanted item
among USB-STB Upgrade, Backup To USB
and OTA Upgrade.
2. Press [OK] to enter the selected item.
6. TOLLS