Installation Instructions

3 DVB-S Receiver
GB
SICHERHEITSHINWEISE
Attachments: Never add any attachments and/or equipment without the
manufacturer consent; as such additions may result in the risk of fi re, electric shock
or other personal injury.
Locating: Slots and openings in the cabinet are provided for ventilation to protect it
from overheating. Do not block these openings or allow them to be blocked by placing
the STB on a bed, sofa or other similar surface, nor should it be placed over a radiator
or heat register.
Power-Cord Protection: Place the power-supply cord out of the way, where it will
not be walked on. Please take special attentions to cords at plugs, convenience
receptacles and the point where they exit from the unit.
Object and Liquid Entry: Never put objects of any kind into this STB through openings,
as they may touch dangerous voltage points or short-out parts that could result in a
fi re or electric shock. Never spill any liquid on the STB.
Note: Moisture may be formed inside the unit in the following conditions:
When the unit is suddenly moved from a cold environment or an air-condition room to
a warm place.
Immediately after a heater has been turned on.
In a steamy or very humid room.
If the moisture forms inside the unit, it may not operate properly. To correct this
problem, turn on the power and wait about two hours for the moisture to evaporate.
Parts Replacement: When the unit parts need to be replaced, user should make sure
the service technician use the replacement parts specifi ed by the manufacturer or
having the same characteristics as the original part. Unauthorized replacement may
put the unit in the risk of fi re, electric shock or other hazards.
Safety Check: After all the maintenances and repairs are done, user is required to
request the service technician to conduct the overall safety check to ensure the
machine is in the proper condition.
BDA Imperial DB 2_basic_GB_MK.in3 3BDA Imperial DB 2_basic_GB_MK.in3 3 07.11.2008 13:30:31 Uhr07.11.2008 13:30:31 Uhr