Installation Instructions

22Installation Guide
GB
3.1.5 Find
1. Press [Blue] button to open the “Find”
window like showed beside. Press
[CH ]/[Vol ] to select the leading
character of the channel name and press
[OK] to confi rm it.
2. After entering the character(s) highlight
“OK” in the window and press [OK] on the
RCU.
3. Press [Exit] button to close the fi nd window and brings you back to the channel list.
3.2 Radio Channel List
Basically the operation of “Radio Channel List” is same as “TV Channel List”, except that
in the small channel window the radio Logo will be displayed.
3.3 Channel Setup
When you enter the “Channel Setup” menu
you will see a screen like beside:
1. Startup Channel: Press [OK] to enter
“Startup Channel” menu to see the screen
like showed beside:
• If you set of “Boot on Channel” to “On”
you can edit the following two items.
If the setting is “Off” the box always
starts with the channel that was run-
ning when the box has been switched
off.
• On the “Mode” item you can select
either “TV channel” or “Radio channel”.
• On “Startup Channel” item you can
open the channel list by pressing [OK].
Then you can select the channel of you
choice. Press [OK] again to confi rm.
3. CHANNEL
BDA Imperial DB 2_basic_GB_MK.in22 22BDA Imperial DB 2_basic_GB_MK.in22 22 07.11.2008 13:30:12 Uhr07.11.2008 13:30:12 Uhr