Installation Instructions

24Installation Guide
GB
3.5 Delete All
To delete all channels:
1. Enter the password. The default password
is “0000”.
2. After entering the password correct a
safety question will show up where you
have to confi rm fi rst
3. Select “OK” to delete all channels or
“Cancel” to cancel the operation and
confi rm with [OK].
4. In step 1 and step 2, pressing [Menu] will exit the function directly without saving.
? Frequently Asked Question
Q: IF I incautiously delete all channels, what should I do?
A: there are two ways to restore:
• To research all channels in the “Installation” menu.
• Use “Factory Default” function to restore all channels in the “Tools” menu.
3.6 Restore channel list and settings
To restore channel list and settings.
1. Enter the password. The default password
is “0000”.
2. After entering the password correct a
safety question will show up where you
have to confi rm fi rst.
3. Select “OK”, press [OK] to restore the last
backup channel list, the current channel
list will be erased. Select “Cancel” press
[OK] to cancel the operation.
3. CHANNEL
BDA Imperial DB 2_basic_GB_MK.in24 24BDA Imperial DB 2_basic_GB_MK.in24 24 07.11.2008 13:30:10 Uhr07.11.2008 13:30:10 Uhr