Installation Instructions

26Installation Guide
GB
After selecting the installation menu you can see the window like beside.
In “Installation” menu:
1. Press [CH
] to select menu items
among Single Search, Multi Search, TP
Scan, Satellite List, TP List and Satellite
Guide.
2. Press [OK] to enter the selected item.
4.1 Single Search
After selecting “Single Search” you will see a
window like beside:
1. In the “Satellite” item press [Vol ] to
select the satellite which you want to scan
or press [OK] to open the “satellite list” to
select directly with [CH ], press [OK]
to confi rm it.
2. LNB Confi guration: Press [OK] to enter
LNB confi guration, you will see a window
like beside:
• LNB Type: Press [Vol ] to switch
among “Standard”, “User” and “Univer-
sal” mode.
For Example: If you use a Dual LNB,
then you should select “User” option
in “LNB Type” and set the correct fre-
quency in LNB type.
• 22K: Use [Vol ] to switch “ON” and
“Off”. The 22KHz signal is used in KU
universal LNBs to change between low
band and high band.
Notice: After choosing LNB type “Universal” you cannot modify 22K.
4. INSTALLATION
BDA Imperial DB 2_basic_GB_MK.in26 26BDA Imperial DB 2_basic_GB_MK.in26 26 07.11.2008 13:30:08 Uhr07.11.2008 13:30:08 Uhr