Installation Instructions

28Installation Guide
GB
4. INSTALLATION
4.2 Multi Search
When you enter the “Multi Search” menu a
window like the one beside will open.
1. In the “Satellite” item press [Vol
] to
select the satellite which you want to scan
or press [OK] to open the “satellite list” to
select directly with [CH ], and press
[OK] to mark/unmark and [MENU] to
fi nish the selection. You can select several
satellites in this menu. The system will use DiSEqC1.0/1.1, DiSEqC1.2 and USALS
functions to search the marked satellites and scan channels.
2. On “FTA Only” item, pres [Vol ] to select scanning of all channels or just scanning of
free channels. If you select “Yes”, it will scan free channels only.
3. On “Scan Channel” item, press [Vol ] to select the scanning range from TV + radio
channels, only TV channels or only radio channels.
4. On “Scan Mode” item, you can select “Auto Scan”, “Preset Scan” or “NIT Search” to
blind scan preset transponders or network transponders of the selected satellite.
5. Select “Search” and press [OK] to start scanning. In the lower part of the window the
progress of scanning and the found channels are displayed.
6. Press [Menu/Exit] to cancel or fi nish the scanning and saving the found channels.
BDA Imperial DB 2_basic_GB_MK.in28 28BDA Imperial DB 2_basic_GB_MK.in28 28 07.11.2008 13:30:06 Uhr07.11.2008 13:30:06 Uhr