Installation Instructions

29 DVB-S Receiver

4. INSTALLATION

4.3 TP Scan

When you enter “TP Scan” menu a window

like the one beside will be displayed.

1. In the “Satellite” item press [Vol

] to

select the satellite which you want to scan

or press [OK] to open the “satellite list” to

select directly with [CH ], press [OK]

to conﬁ rm it.

2. TP Index: Use [Vol ] to select the desired transponder or press [OK] to open the

TP list to select directly with [CH ], press [OK] again to display the TP number

where the channel can be found. Press [Red/Green/Yellow] key on the RCU for the

related functions.

•

When you press [Red] it will display “New TP” in “TP Index” item. You have to set the

parameters of “TP Frequency”, “Symbol Rate” for this new transponder. Therefore

use the number buttons of the RCU. The available range are “3000

13450MHz” and

“1000

45000KS/s”.

• When you press [Green] a safety question will be displayed for conﬁ rmation to delete

the current transponder or not. If you select “OK”, the current transponder will be

deleted and the total number of transponders will be reduced.

• When you press [Yellow] a safety question will be displayed for conﬁ rmation to delete

all transponders or not. If you select “OK”, the all transponders on current satellite will

be deleted.

For existing transponders you also can use number buttons to modify the parameters

of “TP Frequency” and “Symbol Rate” or [Vol ] to change the value directly.

“Polarity” and “FTA only” are used for setting scans conditions. Press [Vol ] to

select a different mode.

• On “TP Scan” item, press [OK] will open another window where you can set “Scan

Mode”, “Program Type” and “NIT Search”. Press [Menu/Exit] to return to the

previous menu.

• Press [Red] button to add a new TP.

• Press [Green] button to delete the current TP.

• Press [Yellow] button to delete all transponders on current satellite

4. Antenna Setup: Press [OK] to enter LNB conﬁ guration, you will see a window like beside:

BDA Imperial DB 2_basic_GB_MK.in29 29BDA Imperial DB 2_basic_GB_MK.in29 29 07.11.2008 13:30:06 Uhr07.11.2008 13:30:06 Uhr