Installation Instructions

36Installation Guide

5. SYSTEM SETUP

5.3 Time & Timer Setting

When you enter “Time & Timer Setting” a menu with this 3 items will be opened.

1. Timer: Select “Timer” item and press [OK]

to enter the “Timer” menu.

You can press [CH ] to select item.

• The current time will be displayed in

the ﬁ rst column. If the current time

is incorrect, please modify it with the

[Number] buttons.

• Timer Number: You can press

[Vol

] to switch the timer number.

There are totally 8 timers.

• Timer Mode: Select how often the timer is running: Once, Daily, Weekly, Monthly

and Yearly, or switch the timer to off.

• Timer Service: Select between TV Channel, Radio Channel and Message.

• When you select “TV Channel/Radio

Channel” (timer setting for channel

change and Wakeup channel/date)

then you have further options you need

to set:

• Wakeup Channel: Press [OK] to

enter the channel list, and select the

channel you want to see with

[CH ], press [OK] to conﬁ rm it.

• Wakeup Date: Use number buttons to input your wakeup date.

• On Time: Use number buttons to input your wakeup time. If date and time are

reached then no matter if the system is in standby mode or in playing mode, it

will automatically switch to the channel you set and start to play.

• Duration: Here you can set the time you want to see or play this channel. After

the time set the system will automatically switch to standby mode. If you don’t

want the box the be switched to standby mode then set the duration to 00:00.

BDA Imperial DB 2_basic_GB_MK.in36 36BDA Imperial DB 2_basic_GB_MK.in36 36 07.11.2008 13:29:59 Uhr07.11.2008 13:29:59 Uhr