Installation Instructions

38Installation Guide
GB
5. SYSTEM SETUP
2. Local Time Setting: When you select
“Local Time Setting” and press [OK] then
you will see a window like the one beside:
• GMT Usage: This item is used to set
the time by using the time signal from
the satellite. Press [Vol ] to change
the setting.
• The “GMT Offset” item is only available
when “GMT Usage” is set to “On”.
Press [Vol
] to set the “GMT Offset” value. With every time you press the button
the time offset will be increased/decreased by half an hour.
• Summer: Press [Vol ] to switch this function “On” or “Off”.
• “Date” and “Time” items are only available when the “GMT Usage” is set to “Off”.
Press [Vol ] to select one item and use number buttons to input time and date
directly.
• Time Display: Press [Vol ] to switch this function “On” or “Off”.
Note: If the current channel provides the correct time information, you will see the
current time after you entered “Local Time Setting” menu. If the channel doesn’t
provide time information, you have to input the date and time information manually.
The most channels support the time signal.
• Press [Exit] to leave the “Time” menu.
3. Sleep Timer: Select “Sleep Timer” item and press [OK] to set the sleep timer. You will
see “Sleep timer OFF/Sleep timer 10/Sleep timer 30/Sleep timer 60/
Sleep timer 90/Sleep timer 120”.
If you set a sleep time, the system will change to standby mode after the chosen time
period.
BDA Imperial DB 2_basic_GB_MK.in38 38BDA Imperial DB 2_basic_GB_MK.in38 38 07.11.2008 13:29:57 Uhr07.11.2008 13:29:57 Uhr