Installation Instructions

28Installation Guide
GB
MENU INFORMATION
4.3 SatcoDX Auto Programming
Press OK key at the Start button to start
receiving date from RS232 for 10 seconds.
4.4 Upgrade By RS232
• Press keys to select among allcode,
maincode , card , Radioback, keydate
defaultdb, userdb. The default option is
allcode.
• Press OK key at the Start button to start
checking serial port.
4.5 S/W Upgrade OTA
• Satellite, Transponder: Select the proper
satellite or transponder.
• Frequency, Symbol Rate, Download PID:
Use numeric keys to input the proper value.
• Polarity: Select between H and V.
• Start: Press OK key to start upgrading.
If no correct searching information, system
will inform „Collecting information“. You can
press OK key at the STOP button and then
press OK key at the EXIT button to return to
the previous window.
System will start upgrading after collecting
information successfully. Press OK key at
the Download button and press OK key at the
Burnfl ash button to start burning. After
booting, press OK key at the Reboot button
to reboot.
BDA Imperial DB 1 CI_GB.indd 28BDA Imperial DB 1 CI_GB.indd 28 27.09.2007 14:48:56 Uhr27.09.2007 14:48:56 Uhr