Installation Instructions

20Installation Guide
GB
MENU INFORMATION
• If select USALS, Delete All item will
turn grey.
Local Longitude, Local Latitude: Press
keys to switch between West and
East, or press keys to switch between
North and South. Press OK key to enter into
the editing mode. Use numeric keys (0-9) to
input the longitude or latitude, press MENU
key or EXIT key to exit. The range of the
longitude is from 0 to 180, while the range of
the latitude is from 0 to 90. If the inputted
value is not in this range, system will pop up
a dialogue „Out of Range“ when exit from
this window. You can press OK key to close
this dialogue.
• Motor Setting: Press OK key to enter into
the Motor setting window.
Satellite, Transponder: Press keys
to select satellite or transponder, or press
OK key to pop up the drop-down list and
select in the list.
2.4 Single Satellite Search
• Satellite: Press keys to select the
satellite in circle. Or press OK key to pop up
the drop-down list, then select the desired
satellite in the list and press OK key to
confi rm.
• FTA Only: Press keys to select
between Yes and No.
• Scan Channel: Press keys to
select among TV+Radio, TV Channel, Radio.
BDA Imperial DB 1 CI_GB.indd 20BDA Imperial DB 1 CI_GB.indd 20 27.09.2007 14:49:02 Uhr27.09.2007 14:49:02 Uhr