Installation Instructions

18Installation Guide
GB
MENU INFORMATION
2.3 Antenna Setup
Part A: Fixed
Suppose that you have selected Fixed
Antenna in the Antenna Connection window.
• Satellite: All selected satellites in the
satellite list are displayed in this item.
Press keys to select the satellite in
circle. Or press OK key to pop up the
dropdown list, then select the desired satellite
in the list and press OK key to confi rm.
• LNB Freq, Transponder, DiSEqC1.0,
DiSEqC1.1: The same operation as the
above.
• 22K, 0/12V, Toneburst, LNB Power: You
can press keys to select in circle.
Part B: Motor
Suppose that you have selected Motor
Antenna in the Antenna Connection window.
• LNB Type: Select the proper LNB type.
• Motor Type: Select between DiSEqC1.2
and USALS. If you select DiSEqC1.2, the
following Local Longitude and Local Latitude
items will turn grey.
• Delete All: Press OK key to pop up the
dialogue „Are you sure to clear set satellite
position of this tuner?“. Press OK key at the
Yes button to clear all the memories about
the position of the satellites that are
connected to the current rotator.
BDA Imperial DB 1 CI_GB.indd 18BDA Imperial DB 1 CI_GB.indd 18 27.09.2007 14:49:04 Uhr27.09.2007 14:49:04 Uhr