Installation Instructions

17 DVB-S Receiver
GB
MENU INFORMATION
• Press red colour key to pop up the Edit
Satellite window. Press PR+, PR- keys to
move cursor up or down.
Name: Use numeric keys to change the
name of the satellite, please refer to the
Edit Channel Name.
Longitude: You can press keys
to switch between east longitude and
west longitude.
After pressing OK key, you can use numeric
keys to edit the longitude, press EXIT key
or the PR+, PR- keys to exit editing mode.
The range of the longitude is from 1 to 180
degree. If beyond this range, system will
inform you „out of range“ when you press
yellow colour key on the RCU.
After setting, press yellow colour key to
save and exit, while pressing blue colour key
to exit without saving.
• Press green colour key to pop up the Add
Satellite window. Same operation as the
above Edit Satellite window, here we don‘t
explain any more.
• Press blue colour key to pop up the
dialogue „Are you sure to delete?“. Select
YES button and press OK key to delete the
selected satellite. You can cancel this
operation by pressing OK key at the NO
button.
BDA Imperial DB 1 CI_GB.indd 17BDA Imperial DB 1 CI_GB.indd 17 27.09.2007 14:49:04 Uhr27.09.2007 14:49:04 Uhr