Installation Instructions

10Installation Guide
GB
MENU INFORMATION
Main Menu
• Make sure that you have installed and connected the cables of the receiver, properly.
If the receiver is in the factory status or there is no program list when power on, the
Main Menu window will be displayed on the screen.
During the normal TV/Radio mode, press MENU key on the RCU to enter into the
Main Menu window.
• This menu consists of
5 major main menus as follows.
• Edit Channel
• Installation
• System Setup
• Tools
• Game
• During the installation the OK key confi rms a selection and LIST key shows Down
List Box if the column has 34 marks. You can also use the numeric keys on the
RCU to enter numeric value.
• Use the PR+, PR- keys to move upwards and downwards from one line to another
line and use keys to move from main menu to sub menu and move from left
side to right side or versa.
• If you want to escape the menu system, please press MENU or EXIT key
on the RCU.
• If there is no program, you can not exit from the Main Menu window by pressing
MENU or EXIT key. System will inform „No channel“ and the following items turn grey.
Sub-menu Turns grey when there is no program
Channel List TV Channel List
Radio Channel List
Delete all
Installation Antenna Setup
Single Satellite Search
Multi Satellite Search
TP List
System Timer
Tools SatecoDX Auto Programming
BDA Imperial DB 1 CI_GB.indd 10BDA Imperial DB 1 CI_GB.indd 10 27.09.2007 14:49:09 Uhr27.09.2007 14:49:09 Uhr