Operation Manual

7.2.3 DRC - Dynamic Range Control

The DRC dynamic range control will reduce the dierence in volume between the

loudest and the least loud signal of a transmission – in practice this means that

quiet tones will be reproduced relatively more loudly, and loud notes will be played

relatively less loud. Switch the DRC on or o in accordance with your listening

preferences, as follows:

While in DAB mode press the Menu key (on the remote control or on the radio),

you will be taken to the DAB menu.

Use the ◄► keys to navigate to the item "DRC".

Conrm by pressing the Enter key. You will be taken to the DRC menu. Use the

◄►keys to select from the option "high", "low" and "o", conrm your selection by

pressing the Enter key, You will be taken back to the DAB mode.

Note: The default setting for DRC is o.

7.2.4 Empty memory

You can use the empty function to remove DAB stations from the station list. This

function may be useful, e.g. if you want to operate the radio at a dierent location

where previously received stations (e.g. local stations) can no longer be received,

or where DAB stations have ceased broadcasting, or have changed the channel.

To do this, proceed as follows:

While in DAB mode press the Menu key (on the remote control or on the radio),

you will be taken to the DAB menu.

Use the ◄► keys to navigate to the item "Empty".

To conrm, press the Enter key, you will be taken to the sub-menu. Use the ◄►

keys to select from the options "yes" and "no". Conrm your selection by pressing

the Enter key, you will be taken back to DAB mode.

7. DAB