Installation Instructions

14Installation Guide
GB
MAIN MENU
2.1 Auto Scan
• Enter the Auto Scan menu.
• In Scan Mode item, press [Left/Right]
key to scan all the channels or just free
channels.
• Move the highlight on the search option,
and press [OK] key to start scanning.
• Press [EXIT] key to exit this menu.
2.2 Channel Scan
• Enter the Channel Scan menu.
• There are two scan modes for you.
You can choose to scan by channel or
by frequency.
• When scan band is UHF and region is
“Germany”, the range of Ch Number is
from 13 to 61. When scan band is VHF
and region is “Germany”, the range of
Ch Number is from 1 to 12. (It’s according
to region.)
• When you fi nished confi guration, move
highlight to search option, and press [OK]
key to start scanning.
• Press [EXIT] key to exit the scanning and
save the current parameters.
2.3 Tuner Setting
• Enter Tuner Setting menu, the screen will
display as beside.
• In Tuner Power item, press [Left/Right]
key to choose off or on.
BDA digibox Basic-T_GB.indd 14BDA digibox Basic-T_GB.indd 14 22.02.2008 16:21:48 Uhr22.02.2008 16:21:48 Uhr