Installation guide

Installing a DECarray Cabinet
4.5 Installing the DECarray Cabinet in a Stripeset Configuration
4.5.2.2 Filling Out the Labels
The labels are available in two sizes: the larger one for the DSSI cables, and
the smaller one for the inside of the SF7x OCP door and the system I/O panel.
Refer to the inside cover of the SF Family Label Booklet for instructions on
filling out these labels.
For the stripeset configurations, the following colored labels are to be used on
the SF7x OCP door, the front panel of the magazine tape ISE, and all DSSI
cables.
Label Color(s) Port SF7x Position SF3x Position
Blue 1 1 Right 2 Right Rear
Red 2 1 Left 2 Left Rear
Yellow 3 2 Right 2 Right Front
Green 4 2 Left 2 Left Front
Blue & white 5 3 Right 4 Right Rear
Red & white 6 3 Left 4 Left Rear
Yellow & white 7 4 Right 4 Right Front
Green & white 8 4 Left 4 Left Front
Blue, red 9 7 Right 1 Right Rear
Yellow, green 10 7 Left 1 Left Rear
Blue, red & white 11 8 Right 1 Right Front
Yellow, green & white 12 8 Left 1 Left Front
Blue, blue & white 13 3 Right Rear
Yellow, yellow & white 14 3 Left Rear
Blue & white, red & white 15 3 Right Front
Yellow & white, green &
white
16 3 Left Front
4–42 Installing a DECarray Cabinet