Installation guide

Installing a DECarray Cabinet
4.4 Installing a DECarray Cabinet in a DSSI VAXcluster Configuration
4.4.2.2 Filling Out the Labels
The labels are available in two sizes: the larger one for the DSSI cables, and
the smaller one for the inside of the SF7x OCP door
1
and the system I/O panel.
Refer to the inside cover of the SF Family Label Booklet for instructions on
filling out these labels.
For the DSSI VAXcluster configuration, the following colored labels are to be
used on the SF7x OCP door, the front panel of the magazine tape ISE, and all
DSSI cables.
Label Color
I/O Ports for
...
SF7x
Position
I/O Port for
...
SF3x
Position
Blue 1,9 5, 1 1 2 Rear
Red 2,10 6, 2 2 2 Front
Yellow 3,11 4, 8 3 4 Rear
Green 4,12 7, 8 4 4 Front
Blue & white 5,13 7 5 8 Rear
Red & white 6,14 8 6 8 Front
Yellow & white 7
Green & white 8
Blue, red 9 1 Rear
Yellow, green 10 1 Front
Blue, red & white 11 3 Rear
Yellow, green & white 12 3 Front
Blue, blue & white 13 7 Rear
Yellow, yellow & white 14 7 Rear
Blue & white, red &
white
15
Yellow & white, green &
white
16
1
The SF3x OCP does not have a place for labels.
Installing a DECarray Cabinet 4–33